Digiprog III Digiprog 3 Odometer Correction Tool V4.94 Full
Package, Digiprog3 Mileage Correction Tools
1. This is newest version Digiprog3 with most competitive price.
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French,
Portuguese, Italiano, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction
software.
5. Quality standards are second to none.
6.Years of experience in digital vehicle engineering.
7. Professional technical service.
Notice: Power-On Password:1V4.94 Add Model List:
:
F150 24C16
Falcon 24c02
Kuga Transit
Mercedes :
W176 new version
W204 new version Diag
W212 new version DiagR 172 Diag new version
R 231 Diag new version
Opel :
Insignia new version
Astra new version
For Audi :
A6 Diag new version
A8 Diag new version
For VW :
Amarok Polo Johnson
Digiprog 3 V4.94 Other Features:1.Service Interval Adjustments and Settings
2.Assyst processing
3.Fault memory read-erase
4.EEPROM programmer
5.Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect
to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the
programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it
in a dry environment at night (don’t leave it in the trunk of your
car) If you are using solvents to remove lacquers from eeprom
ensure they are cleaned
4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading,
writing and saving eeprom information is all done using this menu.
A more detailed guide to using this menu follows later on in the
introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming
vehicles. Manufacturers are set out in alphabetical order and
models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for
reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg
dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed.
Language, password, brightness, volume, and the time/date can all
be set and changed in this menu. You can also change whether your
machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom
chip will be used to store the vehicle data. These chips hold vital
information from the vehicle such as ignition and immobiliser
codes. Loss of this information could result in anything from minor
faults, to major faults involving the vehicle not starting and
having to be taken to the main dealer. This is why it is very
important to read and save the original information from the Eeprom
before programming, this way if any errors do occur you can always
return to the point you started. The process of reading and saving
this information is very simple. The Eeprom chip itself will have a
mask number printed across the top of it, for example a widely used
chip is a 93C46. You can connect the chip to your DigiProg by using
adaptor ST01 or ST04. Most chips are surface mount eeproms which
will use ST01, but the larger DIL chips will use ST04.
Digiprog III V4.94 Screen Display:
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters
Contact Information:
Whatsapp: +86-13480159018
Live Support: Chat with us online
Email: tina@pro-diagtool.com
Skype: oneflysky
